Reversing lights Plug n Play Crafter / Grand California / TGE

€259,00
| /
Bestellung 14.07.
Lieferung 21.07. – 28.07.

LED reversing lights. Simply bright and unique.

With this LED reversing light, you'll maintain visibility even in the darkest night. Whether it's a forest track, a tight parking space, or a completely unlit environment, you'll immediately see what's happening behind you and can reverse much more calmly.

Installation without effort

The ready-to-use plug-and-play wiring harness makes installation incredibly easy. You don't need any special tools or prior knowledge. Simply connect, insert, and drive off – the light power is immediate.

Neatly integrated

Many reversing lights look like they've been screwed in as an afterthought. This reversing light, on the other hand, fits perfectly and is neatly aligned. The result looks high-quality and blends seamlessly into the vehicle, just like it came from the factory.

Unique and protected

This reversing light isn't something you find everywhere. It's protected and available exclusively. You'll get a stylish upgrade that visibly enhances your vehicle.

Performance that convinces

The high-performance LEDs deliver powerful brightness and ensure clear visibility when maneuvering. Perfect for dark parking spaces, confusing paths, and any situation where you simply need more light.

Technical data

Vehicle compatibility

VW Crafter

VW Grand California

MAN TGE


LED headlights

Power consumption 12 V = 0.75 A

Luminous flux 1200 lm

Color temperature 5700 K

Protection class IP68 and IP69K

Type approval ECE R148, ECE R23 and ECE R10


Housing

Nylon Pa12 in matte black with a slight texture

Can be painted

No need to remove the bumper; installation is done directly from the outside.


Cable set

Plug-and-play wiring harness that simply plugs in between the taillights.

Licensing and legal notice

The LED reversing lights are approved according to ECE R48 and are therefore generally permitted for use on public roads in Germany. Registration in the vehicle documents is usually not required.

Please note that the ECE R48 regulations must be observed during installation and use. Different regulations may apply depending on the vehicle type, year of manufacture, and existing lighting equipment. Individual vehicles or modifications may be subject to different national or vehicle-specific regulations.

The vehicle owner is responsible for proper installation and compliance with all applicable legal regulations. If in doubt, we recommend consulting a local testing center or an accredited technical inspection organization before installation or commissioning.

GPSR Information

Name: Extrem Vans

Address: Beethovenstr 7 79787 Lauchringen

Email: info@extrem-vans.de

Website: https://www.extrem-vans.de

European Manufacturer: Yes

FAQ

How long will it take for my item to ship?

Shipping time always depends on the product group. For example, 3D printed products are manufactured to order, which means they are not stock items. The production time in this example is 10 to 14 business days.

If I have a question, how can I reach you?

It's very simple:

Either you send us an email to shop@zm-camping.de or you simply call us during our hotline hours at +49 2131 5954914.

We look forward to hearing from you!

Can I also pick up my order from you?

Unfortunately not, we are an online shop only and do not have a physical store.

For example, our warehouse is not located at our company address.

news

  • More water pressure in the Grand California, without issues with the control unit

    Mehr Wasserdruck im Grand California, ohne Ärger mit dem Steuergerät

    Many Grand California drivers wish for more water pressure in their Cali, be it for washing dishes or, especially, for showering.

    That's why many quickly get a stronger pump and install it. Unfortunately, the replacement isn't quite so simple. The Grand California, or rather its control unit, supplies power to the pump. A larger pump means greater power consumption, which is clear enough. However, you would also have to tell the control unit this, and that's precisely what isn't easily done.

    The result: Sometime after the replacement, perhaps not immediately, perhaps only in 2 weeks or 2 months, the pump stops pumping. The control unit thinks there's a problem because the current is higher than it should be. Usually, only a reset helps then, and the hope that it will fix the issue.

    This is exactly what happened to us on vacation. Our stronger Reich pump (25 instead of 19 liters per minute) simply stopped working, and nothing helped – no main switch, no reset, nothing. Luckily, we had an original 19-liter spare pump with us; we installed it, and the water immediately started flowing again.

    That annoyed us, so we built a solution ourselves. Our cable set solves the pump problem quickly and easily:

    • It's plugged in between the existing connectors, no cutting, no soldering on the VW harness
    • The original pump signal switches a relay (12 V/30 A) instead of directly loading the pump
    • The pump gets its power cleanly via an internal 15 A fuse
    • Your vehicle's electronics only see the small relay load and remain protected

    Nothing on the vehicle needs to be cut or destroyed; the installation is completely plug and play. Installation takes less than 5 minutes and works even without extensive technical know-how. The cable set is equipped with original Volkswagen connectors and therefore integrates perfectly, just like an original component.

    The cable set is available in our shop in two versions:

    1. Only the wiring harness (if you already have a stronger pump)
    2. With a Reich Power Jet Plus pump (25 liters per minute)

    Do you have any questions about the cable set? Just contact us, we'll be happy to help. And now, enjoy your shower.

     

    Continue reading
  • June Promotion: 15% off Eurobar Front Bars and ETB Side Steps

    Juni Aktion: 15% auf Eurobar Frontbügel und ETB Trittstufe

    Hey everyone!

    Summer is coming, and with it, the desire to improve your Grand California, Crafter or TGE. That's why we've picked out two parts for June that we really like, and we're giving you 15% off for the entire month. With the code ZMALPHA, you'll get the discount directly in your shopping cart.

    🛡️ Metec Eurobar Front Bar (VW Crafter and MAN TGE from 2017)

    A front bar not only looks great, but it can also do more. In tight parking spaces, on forest paths or in dense city traffic, the Eurobar absorbs the first impacts before they hit your Crafter or TGE. Made of 1.2 mm thick stainless steel tubing with a 70 mm diameter, matte black and with a vehicle-specific design for quick installation. It comes with EC type approval, so you don't have to worry about registration.

    🪜 AlphaDynamik ETB Swivel Step (Grand California)

    Tired of the original Thule step on your Grand California? Then this is your upgrade. 240 kg load capacity, LED lighting as standard and a smart swivel mechanism for the ideal entry height. The best part: We rely on the original AlphaDynamik control unit, so all functions are retained, including anti-trap protection and workshop mode. Our integration module is completely waterproof and sits protected under the driver's seat. Installation like from the factory, without loose cables and without provisional connections.

    What you need to know

    The 15% discount is valid until June 30th at 11:59 PM for exactly these two items. Simply enter the code ZMALPHA in the shopping cart and the discount will be applied. After that, prices will return to normal. So if you've been eyeing one of these parts for a while, now's the time.

    👉 Check out the shop and get your upgrade

    Best regards, Your ZM Team


    Please note: Depending on the order quantity, there may be delays in the delivery date. A subsequent discount is not possible; the code must be entered directly in the shopping cart when ordering. Payment via PayPal is not available for these two items; all other payment methods can be used as usual.

    Continue reading

Join the club ☕️

Sign up to our newsletter to receive updates about our future roasts!