This cable connects your EcoFlow Power Station to the Alternator Charger. This specific connection activates Reverse Charge Mode, which turns your Power Station into a power reserve for the entire vehicle.

What Reverse Charge can do
Normally, power flows in one direction: the Alternator Charger charges your Power Station while driving. With Reverse Charge, this is reversed. The energy from the Power Station then charges the vehicle battery, either the leisure battery or the starter battery, depending on the connection. This ensures you always have power where you need it, should the need arise.

Why you need this cable
Without this cable, your Alternator Charger can only charge your Power Station, nothing more. With the cable, two operating modes are added: Reverse Charge Mode and trickle charging, which keeps your battery maintained during longer periods of inactivity. You select the mode in the EcoFlow app on the device details page.

Important for compatibility
The cable is exclusively compatible with the EcoFlow Alternator Charger 600 and the EcoFlow Alternator Charger 1000. Your Power Station requires an XT150 port.

Which length is right for you
The 1-meter version fits if the Power Station and Charger are close together. The 2-meter version gives you more flexibility if the Power Station is further away or you want to route the cables neatly within the vehicle.

The cable is designed for high currents in vehicle operation, with a robust, heat-resistant construction. Once connected, you have a secure and low-loss connection, whether in a van, motorhome, or off the beaten path.

Technical Data

• Length: 1 meter or 2 meters, depending on selection
• Two different connectors: a lockable plug labeled BATTERY, and a flat screw-on connector at the other end
• Cable construction: multi-core, robust, and heat-resistant
• Designed for high currents in vehicle operation
• Compatible with EcoFlow Alternator Charger 600 and 1000