EcoFlow Alternator Charger 600W – On-the-Go Charger
5%
Skonto bei Zahlung per Überweisung.
5 % auf den Warenwert – du überweist einfach weniger,
den genauen Betrag zeigt dir die Bestellbestätigung.
Gilt nur, wenn du keinen Rabattcode einlöst.
Quantity
›
Lieferung
14.10. – 22.10.
Do you want to recharge your EcoFlow Power Station while driving, but don't need the full power of the larger models? The EcoFlow Alternator Charger 600 is the compact solution. Connected to the alternator of your 12V or 24V vehicle, it charges your power station with up to 600 W, completely automatically while you drive.
The clever thing about the new generation: The charger starts automatically with the engine via the integrated ignition cable. No button press, no app needed. This also solves the quirks of modern smart alternators, which often caused problems with older chargers.
Three functions in one device: Charging while driving, battery maintenance and reverse charge, with which you can even revive your starter battery in an emergency. In addition, there is the usual EcoFlow protection circuit against reverse polarity, overcurrent, short circuit and deep discharge of your vehicle battery.
Ideal for anyone with a compact power station (1 kWh and below) who wants to reliably top up power on the go, without a permanently installed second battery and DC-DC converter.
Your advantages at a glance
Up to 600 W charging power while driving
Suitable for 12V and 24V vehicles
Automatic start via integrated ignition cable, even with smart alternators
Three operating modes: Charging, battery maintenance and reverse charge
Control and monitoring via app
Extensive protection functions, 125 A fuse
Fanless and encapsulated, making it insensitive to dust (IP4X)
Technical data
Charging mode input: 11–31 V DC (12V/24V) / max. 45 A
Charging mode output: 24 V DC or 40–60 V DC / max. 12 A, max. 600 W
Battery maintenance input: 40–60 V DC / max. 3 A
Battery maintenance output: 13.8 / 27.6 V DC / max. 100 W
Reverse Charge input: 40–60 V DC / max. 12 A
Reverse Charge output: 13.8 / 27.6 V DC / max. 45 A
Weight: approx. 1.1 kg
Scope of delivery
EcoFlow Alternator Charger 600
Alternator input cable with integrated ignition cable (8 AWG, 5 m)
XT60 output cable (14 AWG, 1 m)
125 A fuse cable (8 AWG, 0.2 m)
Mounting material
User manual and warranty card
Questions about integrating it into your van? Just write to us, we know the setup from our own experience.
